
KSN
KSN (C.I. 368), a crystalline powder listed for polyester fibers and selected plastic systems.
- CAS
- 5242-49-9
Allow Google Analytics cookies to measure visits and saved inquiries? Optional: the inquiry form works without analytics. Privacy notice
SUNWAY / Applications
Prepare a polyester brightener evaluation by defining the material and process first. Compare ER-I and ER-II as candidates, check current TDS/SDS, and plan a representative trial.
Request a sample →
GRADE COMPARISON
| Grade | C.I. | CAS | Catalogue appearance |
|---|---|---|---|
| ER-I | 199 | 13001-39-3 | Slight yellow uniform powder / Light green suspension (liquid) |
| ER-II | 199:1 | 13001-38-2 | Slight yellow uniform powder / Light green suspension (liquid) |
Different catalogue identities are not evidence of interchangeable performance. Review the current TDS/SDS for the supplied grade and test a representative sample before production.

MATERIAL → GRADE → TRIAL
Bring the material form, addition stage and reference sample into one brief to give polyester-focused trials a clear starting point.
Read the selection and sample guide →Identify the material form and any blend before comparing the ER-I and ER-II candidates.
Keep these routes separate in the inquiry. Describe the addition stage and heat history; do not transfer a recipe between them.
Set the reference sample, viewing or measurement method and acceptance criteria before testing on representative material.
These are starting points for evaluation, not interchangeable production recommendations. Request the current grade-specific TDS/SDS and validate on representative material under your actual process conditions.
Textile finishing, fiber processing and polymer processing are different inquiry contexts. Tell us the fiber or polymer composition, material form, addition stage and heat history. Do not transfer a recommendation from one route to another solely because both involve polyester.
ER-I and ER-II are polyester-focused evaluation candidates with separate catalogue identities and form specifications. Sunway Chemicals can supply these two models and arrange samples. Select the exact supplied grade after current-TDS review, then record the sample label, trial conditions and comparison against a reference. Other catalogue entries below are not automatic substitutes.
CATALOGUE
Catalogue information supports initial selection. Request the current TDS/SDS and evaluate a representative sample before production.

KSN (C.I. 368), a crystalline powder listed for polyester fibers and selected plastic systems.

OB-1 (C.I. 393), a light-yellow powder listed for polyester fibers, polymers and plastic products.
SUNWAY
Share a product, application or specification. Your request goes directly to the SUNWAY inquiry team.